MAINTENANCE REQUIREMENTS
1. Wash and clean only with a soft cloth without the use of aggressive detergents or scouring powder.
2. Paint over all mechanical scratches that might occur.
3. Once a year grease hinges and locks with oil. As for sealing bands – use maintenance measures meant for automobile sealing bands.
Door leaf can be adjusted in three dimensions.
1. Horizontal adjustment:
1.1. Turn both adjustment screws A equally (max. one turn) in relevant direction. Avoid tilt knuckles and tension on the axis. Proper alignment is crucial!
2. Vertical adjustment:
2.1. Slightly loosen the clamping screws D in the frame part of all hinges;
2.2. adjust the height by turning the eccentric adjustment B of the middle hinge in the desired direction;
2.3. tighten the clamping screws D of upper and lower hinge to relieve the central hinge;
2.4. retighten the clamping screws D in all hinges firmly.
3. Leaf distance to door frame:
3.1. Slightly loosen the clamping screws D in the frame part of all hinges;
3.2. adjust the compression by turning the eccentric adjustments C of the upper and lower hinge in the desired direction;
3.3. retighten the clamping screws D.
“THERMIKA” DOOR LEAF ADJUSTMENT
Door leaf can be adjusted in three dimensions.
1. Horizontal adjustment:
1.1. In all hinges tighten or loosen bolts A.
2. Vertical adjustment:
2.1. In order to raise door leaf:
2.1.1. In all hinges tighten bolts B.
2.2. In order to lower door leaf:
2.2.1. In all hinges loosen bolts B.
3. Leaf distance to door frame:
3.1. Loosen fixating small bolts C;
3.2. in all hinges tighten or loosen bolts C;
3.3. tighten fixating small bolts C.
“PRIMA THERMO” DOOR LEAF ADJUSTMENT
Door leaf can be adjusted in horizontal and vertical dimensions.
1.1. In all hinges loosen bolts 1;
1.2. screw or unscrew the adjusting bolts 2;
1.3. tighten bolts 1.
2. Vertical adjustment:
2.1. In order to raise door leaf:
2.1.1. In all hinges loosen bolts 3;
2.1.2. raise with the adjusting bolts 4;
2.1.3. tighten bolts 3.
2.2. In order to lower door leaf:
2.2.1. Lower with the adjusting bolts 4;
2.2.2. tighten bolts 3.